Renewable Design for Plastic Injection Molding Supplies - LED Street Light-PQSL003 – P&Q Lighting

Renewable Design for Plastic Injection Molding Supplies - LED Street Light-PQSL003 – P&Q Lighting

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for Die Casting For Lighting Parts, Weatherproof Bulkhead Light, Mining Lamp, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services.
Renewable Design for Plastic Injection Molding Supplies - LED Street Light-PQSL003 – P&Q Lighting Detail:

This is the description of LED Street Light-PQSL003

golf 3

LED Street Lights

golf 2

LED Street Lights

1

LED Street Lights

● Unique Design Using Modular Led Source Kit With High Efficiency Led Chips

● Range Of Lumen Packages And Light Distributions

● Integral Driver With Automatic Temperature Controller To Prevent Over Heating In High Ambient Environments

● Low Profile Design Reduces Wind Resistance And Maximises Heat Dissipation For Optimum Performance

● Die-Cast, Low Copper Aluminium Housing With Polyester Powdercoat Finish, Resistant To Corrosion And Saline Environments

● Unique Mounting Bracket Can Be Positioned For Post Or Arm With Dia. 48-60mm

● Installation Features Include Safety Cut-Off Switch, Ip66 Rapid Electrical Connector, Class Ii Electrical Classification Only.

● Control Options, Dimming, Midnight Function Available.


12

1. Aluminium Gear Box Cover ×1

2. Aluminium Body ×1

3. Aluminium Gear Box Cover Plate×1

4. Variable-Angle Mounting Bracket ×1

5. Reflector ×1

6. Silicone Rubber Gasket ×1

7. Tempered Glass ×1

8. Body Cover ×1 9. Lens ×1 

CE BCTC-2011009558-SZJR
BCTC-2011009559-SZJR 
IP65 BCTC-2011009792-SZJR
Version Dim (Mm) Mass (Kg)
80W LED 634×263×102 5.7
150W LED 762×322×107 8.2


led street light 3

Installation Or Assembly Instructions
Please Read These Installation Instructions Carefully Before Installing Or Maintaining This
Equipment. These Instructions And Local Regulations(Where Applicable), By An Authorised And Licenced Electrician. Important – The Product Must Be Maintained And Operated In Accordance With The Manufacture’s instructions, Failure To Do So May Damage The Product And Services. It Is Strongly Recommended That This Important Note Be Communicated To The Owner And Or Operator Of The Installation At The Time Of Site Commissioning. Good Practice Does Not Recommend The 24/7 Use Of Products Without The Application Of Suitable Switch Cycle Intervals. P&Q Is Not Responsible For Any Product Not Maintained In Accordance With The Recommended Procedures. All Products Should Be Thoroughly Cleaned On A Regular Basis To Ensure The Optical Performance, Together With The Electrical,Mechanical And Structural Integrity As Designed, Is Maintained Throughout The Service Life Of The Product.
“Consult A Qualified Electrician To Ensure Correct Branch Circuit Conductor”

GOLF Ⅰ GOLF Ⅱ
Ip Rating Ip65 Ip65
Nominal Voltage Ac180-240v  Ac180-240v
Line Current 2.65A 4.2A

Prior To Installation Products Are To Be Stored In Cool And Dry Conditions.

LED Street light installation-01

4

1. Foam Filled Cover

2. Foam Filled Bottom

3. Golf Ⅰ: 680×300×140mm Carton    
    Golf Ⅱ: 795×355×140mm Carton


Product detail pictures:

Renewable Design for Plastic Injection Molding Supplies - LED Street Light-PQSL003 – P&Q Lighting detail pictures

Renewable Design for Plastic Injection Molding Supplies - LED Street Light-PQSL003 – P&Q Lighting detail pictures


Related Product Guide:

Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for Renewable Design for Plastic Injection Molding Supplies - LED Street Light-PQSL003 – P&Q Lighting , The product will supply to all over the world, such as: Nepal, Indonesia, Kazakhstan, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question items they do not understand. We break down people barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
  • Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
    5 Stars By Beatrice from Hanover - 2018.09.08 17:09
    The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
    5 Stars By EliecerJimenez from Malaysia - 2018.12.11 11:26
    Write your message here and send it to us